Industrial Electro-Pneumatics 2017-12-11T17:25:49+00:00

Industrial Electro-Pneumatics

EXP3



EXP3 Data Sheet

EXP3 is a comprehensive training system for Industrial Electro-Pneumatics. This system provides the hands-on training required to effectively study air and electrical logic circuitry used by today’s employers. TII’s curriculum covers air logic and electro-pneumatic control technology in its four areas of instruction: Physical Properties and Fundamentals, Applications, Air Logic, and Electro-Pneumatic Control.

Our training system is accompanied by a comprehensive student manual and instructor’s guide which focus on the background and applications of combining air and electrical logic with pneumatic components in industrially relevant laboratory exercises. The curriculum begins with a fundamental review of basic pneumatic principles as well as an introduction to programmable logic control (PLC). These sections are followed by air logic and electrical control circuits and schematics. Additional topics focus on typical air logic and electro- pneumatic applications found in industry.

  • Lockable storage area provides space for manuals and additional components
  • Speciality components available to expand capabilities of the system
  • Mounting hardware included

Specifications

System Specifications

  • Constructed of a welded steel A-shaped frame with formed sheet steel shell
  • Modular design can be used as a stand-alone system or integrated into a bench configuration with other TII trainers
  • Components are either panel-mounted or attached to a sub-plate for easy T-slot adjustable mounting

Instrumentation Section

  • Instrumentation Section is mounted at eye-level for easy reading of gauges and PLC display
  • Panel is constructed of 16-gauge stainless steel
  • All gauges, PLC inputs / outputs, and instruments have been identified in large letting
  • Includes: filter / regulator, system pressure gauge, two in-line pressure testing gauges, two four-port manifolds, 24-volt DC power supply, two large indicator lights (red and green)
  • PLC with eighteen I/O (twelve inputs with green-colored jacks and six outputs with white-colored jacks) embedded into the center of the panel
  • Adjustable pressure switch with access jacks or normally open or closed operation
  • Jacks are used for electrical interfacing

Component Section

  • Mounted at an angle for ease of use
  • Constructed of 16-gauge stainless steel
  • All instruments are clearly identified with large silkscreened lettering
  • Individual component electrical interfacing via panel-mounted female connectors using universal connecting patch cord / banana jack system

Panel Components

  • Four solenoid valves
  • Four air pilote valves
  • Three Manual Control Valves
  • One Red-Colored E-Stop Valve
  • Three Switches: P/B, Multi-Position Selector
  • Three Cylinders with Flow Controls and Sensors
  • Six Sensor Sockets (see included sensors)
  • One Adjustable Potentiometer with Panel Meter Display Readout (0 – 10 VDC)

Additional Components

  • Two Roller valves
  • One Pressure sequence valve
  • One Quick Exhaust valve
  • One Shuttle “OR” valve
  • One Dual-Pressure “AND” valve
  • One Check valve
  • One Needle valve
  • One Flow Control valve
  • One Venturi valve

Additional Sensors: Included

  • One Inductive Proximity sensor
  • One Capacitive sensor
  • One Photo-Electric sensor
  • Two Limit switches

Storage Compartment

  • Behind the component panel and accessed through a hinged door with lock
  • Designed for storing hoses and extra components
  • All components, hoses, instruments, and fitting are industrial-grade design
  • All direction control valves are removable and dissectible
  • Actuators and spools on direction control valves are interchangeable
  • All fittings are ball-check quick connect / disconnect

Options

  • A wide range of specialty components can be purchased for mounting on the system’s T-slot experiment surface
  • EPX3 can be purchased with portable air compressor system (EXPI-C) and mobile cabinet (EXP-MB)
  • Three part, combined system model number: EXP3-EPB

LEARNING SYSTEMS

TECHNOLOGY FUNDAMENTALS
INTEGRATED AUTOMATION

CONNECT

56 East End Drive
Gilberts, IL 60136
800.451.2169 Toll Free
847.428.3085 International
847.428.3286 Fax

sales@tii-tech.com

CONTACT OUR TEAM

TII Technical Education Systems (TII) is incorporating the the newest technology with an extensive curriculum for academic success, preparing students for today’s modern employers. TII’s broad product line offers instruction in each of the major areas of technology skills training used in industrial systems today: Technology Fundamentals, Advanced Systems, and Integrated Automation.

Get in touch

56 East End Drive
Gilberts, IL 60136
800.451.2169 Toll Free
847.428.3085 International
847.428.3286 Fax

sales@tii-tech.com

Contact Our Team